Mega Sale! Save 22% on the Opto 22 SNAP-B8M Snap B-Series 8 Module Rack by Opto 22 at Days of Revelation. MPN: SNAP-B8M. Hurry! Limited time offer. Offer valid only while supplies last. The SNAP-B8M rack mounts a compatible SNAP brain (such as the serial B3000 or the SNAP-UP1-ADS) and eight SNAP I/O modules. Field devices are wired
Product Description & Reviews
The SNAP-B8M rack mounts a compatible SNAP brain (such as the serial B3000 or the SNAP-UP1-ADS) and eight SNAP I/O modules. Field devices are wired directly to the top-mounted removable connectors on the SNAP I/O modules. The rack can be panel mounted or DIN-rail mounted and requires a 5 VDC power source. SNAP B-series mounting racks are designed to hold an intelligent SNAP I/O processor - either a SNAP brain or an on-the-rack controller - and several I/O modules. This rack family includes racks that are compatible with ARCNET and serial SNAP brains, including those using Modbus and Profibus protocols, and with some Ethernet-based SNAP Ultimate I/O on-the-rack controllers and SNAP Ethernet I/O brains. Since SNAP analog, digital, and serial I/O modules have the same footprint, customers using most SNAP B-series racks can mix modules on the same I/O mounting rack. However, module types, features, and positions on the rack vary depending on the capabilities of the brain or on-the-rack controller used. Field devices are wired directly to the top-mounted removable connectors on the modules plugged into each rack. The module and rack design allows modules to simply snap on and off the mounting rack. SNAP racks use a retention rail locking system that holds modules securely to the rack. Normally, a hold-down screw is not required. However, for applications that require additional module security, SNAP racks have provisions for two 4-40 by 1/2" standard machine screws to hold each module in position. All SNAP racks offer panel mounting and the option of DIN-rail mounting. SNAP racks require a 5 VDC power source. Replacement fuse: SNAP-FUSE4A or BEL5 5HF4. Operating temperature: 0 to 70 degree celsius. Relative humidity: 95 percent non-condensing. Note: I/O Processor means a SNAP brain or on-the-rack controller. 4 Four-channel SNAP digital modules can be used in positions 0-7 only.
Underwriters Laboratory, Factory Mutual, IEC 950: 1991-09, 89/336/EEC, 2002/95/EC, Defense Federal Acquisition Regulation Supplement
Features & Highlights
- Secure mounting for snap I/O modules plus a snap brain or on-the-rack snap controller
- Analog, digital, and serial modules on the same rack
- Panel or DIN-rail mounting
- Modules snap into place
- Power (2) requirements: 5.0 to 5.2 VDC at 2.6 Amps max
5 x 1.8 x 10.4 inches
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Opto 22, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
mpn: THY170626, ean: 0616880104303,
SEMIKRON SKKT 92B12E Dual Thyristor 95 Amp 1200 volts Package of 1 unit, Hardware IncludedSEMIKRON SKKT. 92B12E. Dual Thyristor. 95 Amp 1200 volts. Package of 1 unit, Hardware Included. ...
By Opto 22
The SNAP-ODC5SRC provides four channels of 5-60 VDC digital (discrete) output in a source configuration, each channel switching a separate DC load. The module features a removable top-mounted connector for easy access to field wiring and channel-spec...
mpn: MD-D1298T-1, ean: 6954525597863,
DIN Rail Mount Screw Terminal Block Breakout Board for Arduino NANO/MICRO. With the breakout board, you can easily extend Arduino projects to industrial control applications. PCB mount Terminal Block: pitch 5.0mm/0.197", strip length 7mm, screws - M2...
mpn: MD-D1003AT/5V-1, ean: 6921407349957,
DIN Rail Mount 16 Channel Common Anode LED Indicator Gate Module, 5Vdc Version. Operating voltage: 3.5 ~ 12Vdc. Diameter 5mm cylindrical red LEDs. 750 ohm 1/4 watt resistors. Pitch 3.81mm/0.15" screw terminal block. FR-4 fiber glass PCB, dual copper...