Motor Drives - Page 2 - Super Savings! Save up to 32%


Super Savings! Up to 32% off on Motor Drives at Days of Revelation, Page 2. Top brands include Cytron, WitMotion, Leeson, Estink, WAM Direct, RATTM Motor, Eosphorus ML, RATTMMOTOR, LM YN, Dowonsol, B Blesiya, Hilitand, KB Electronics, & SAVORY. Hurry! Limited time offers. Offers valid only while supplies last.



10A Bi-Directional DC Motor Driver, 5-30V, 30A Peak
10A Bi-Directional DC Motor Driver, 5-30V, 30A Peak
By Cytron
In Stock
$15.80

mpn: 36010398,

4.1 out of 5 stars with 8 reviews
This controller is able to regulate the speed of DC motor through PWM. Features: Speed controller / motor driver to drive the motor. Bi-directional control for 1 brushed DC motor. Support motor voltage ranges from 3V 5V to 25V 30V. Maximum current up to 10A 13A continuous and 15A 30A peak (10 seconds). 3.3V and 5V logic level input. Solid state components provide faster response time and eliminate the wear and tear of mechanical relay. Fully NMOS H-Bridge for better efficiency and no heat


16 Channel PWM Servo Motor Driver Controller Board Module Bluetooth PCB steering gear for SG90 MG995 Arduino Robot Raspberry Pi DIY Servo Shield Module
16 Channel PWM Servo Motor Driver Controller Board Module Bluetooth PCB steering gear for SG90 MG995 Arduino Robot Raspberry Pi DIY Servo Shield Module
By WitMotion
In Stock
$14.90

mpn: Servo Motor Controller, ean: 0756040155797,

4.2 out of 5 stars with 32 reviews
Product document: https://wiki.wit-motion.com/english The servo motor is used in aircraft model and ship model movement, and has been extended to various electromechanical products. It is also widely used in robot control. Offline control makes connection more convenient. Parameter: 1 Channels: 16 2 Size: 43.5mm X 36mm X 12mm3 Mounting hole position : 37mm X 30mm,Aperture 3mm.4 Voltage: USB: 5V , TTL:3.3V(two choose one), Servo Motor supply : 5-7.2v. 5 Communication Interface: USB/ TTL UART


Leeson 101434.00 General Purpose Rigid ODP Motor, 1 Phase, 48 Frame, Rigid Mounting, 1/4HP, 3600 RPM, 115/208-230V Voltage, 60Hz Fequency
Leeson 101434.00 General Purpose Rigid ODP Motor, 1 Phase, 48 Frame, Rigid Mounting, 1/4HP, 3600 RPM, 115/208-230V Voltage, 60Hz Fequency
By Leeson
In Stock
$257.74

mpn: 101434.00, ean: 0691720005552,

4.8 out of 5 stars with 20 reviews
Leeson manufactures electric motors, gear reducers, and electronic controls for commercial and industrial applications. The company, founded in 1972, is headquartered in Grafton, WI.Open, drip-proof (ODP) for protection from dripping water. Rated at 3,600 rpm. 115/208-230V input voltage, single phase, 1/4hp. UL Listed and CSA certified for quality assurance.


Variable Frequency Drive, AC 220V 1.5KW Variable Frequency Drive VFD Speed Controller for 3-Phase Motor
Variable Frequency Drive, AC 220V 1.5KW Variable Frequency Drive VFD Speed Controller for 3-Phase Motor
By Estink
In Stock
$71.99

mpn: Yosoofos7rg0kc3, ean: 0724942200648,

4.7 out of 5 stars with 27 reviews
Description: This Variable Frequency Drive is made of high quality shell material, heat resistant and flame retardant. Humanized keyboard design, easy to operate. Digital display screen makes it convenient to read clearly. Specification: Application range: Universal Power supply phrase: Single phrase Rated current: 8A Rated voltage: AC220V(single phrase) Power supply voltage: Low voltage Suitable motor power: 1.5 kW Suitable motor type: for 3-phase Motor Filter: No DC power supply: Current


3Pcs Stepper Motor Driver, CNC Micro-Stepping Stepper Motor Driver Name23 ST-M5045 2phase 4.5A 0-5V DC 256
3Pcs Stepper Motor Driver, CNC Micro-Stepping Stepper Motor Driver Name23 ST-M5045 2phase 4.5A 0-5V DC 256
By WAM Direct
In Stock
$117.99
$79.99
You Save: 32%

ean: 0700961985131,

4.4 out of 5 stars with 38 reviews
ST-M5045 is a cost effective,hig performance bi-polar two phase micro-stepping driver applying pure-sinusoidal current control technique .Its performance is more better than M542,2M542 drives.It is best suited for the applications that desired extreme low noise and heat. It operates well in an environment,where electricity supply experience instability and fluctuation.With an automatic optimization speedctrol technique,the Powerstep series drive output is very stable,with almost zero vibration


Stepper Motor Driver, CNC Micro-Stepping Stepper Motor Driver Name23 ST-M5045 2phase 4.5A 0-5V DC 256
Stepper Motor Driver, CNC Micro-Stepping Stepper Motor Driver Name23 ST-M5045 2phase 4.5A 0-5V DC 256
By WAM Direct
In Stock
$35.99
$29.99
You Save: 17%

ean: 0700961985124,

4.1 out of 5 stars with 40 reviews
ST-M5045 is a cost effective,hig performance bi-polar two phase micro-stepping driver applying pure-sinusoidal current control technique .Its performance is more better than M542,2M542 drives.It is best suited for the applications that desired extreme low noise and heat. It operates well in an environment,where electricity supply experience instability and fluctuation.With an automatic optimization speedctrol technique,the Powerstep series drive output is very stable,with almost zero vibration


Nema17 Nema23 Digital Stepper Motor Driver DM556D 5.6A 24-50VDC 256 Microstep High Performance for CNC Router Engraving Milling Machine
Nema17 Nema23 Digital Stepper Motor Driver DM556D 5.6A 24-50VDC 256 Microstep High Performance for CNC Router Engraving Milling Machine
By RATTM Motor
In Stock
$34.99

mpn: DM556D, ean: 0785004502216,

4.6 out of 5 stars with 37 reviews
Package include: 1 x DM556D Stepper Motor Driver(5.6A,50V,256microstep) English user manual will send by mail. DM556D Stepper motor drive specification SummarizeDM556D is a new generation of high performance digital stepper motor drive, adopt 32 bit DSP technology, application control of noise and vibration reduction of the motor running algorithm greatly, which has the advantages of low noise, low vibration, low temperature rise characteristics. The drive voltage is DC 24V-50V, suitable for th


Eosphorus ML Single Phase Speed Variable Frequency Drive Inverter 2.2KW 3HP VFD 12A 220V
Eosphorus ML Single Phase Speed Variable Frequency Drive Inverter 2.2KW 3HP VFD 12A 220V
By Eosphorus ML
In Stock
$123.70

mpn: MLBS-031, ean: 0797648624476,

4.2 out of 5 stars with 46 reviews
specifications: rated voltage: ac220v (single phase) suitable motor power: 2.2kw control method: v/f closed loop output voltage adjustable method: pwm control rated current: 12a max. Output frequency range: 0 - 400hz package contents: 1 x variable frequency drive 1 x operation manualIt has good anti-trip performance and ability to adapt to rough power, temperature, humidity and dust interference, greatly improved stability.. This vfd uses unique control method to realize high torque, high


Ratio 1:5 Gearbox Nema23 Geared Stepper Motor 76mm 850oz-in 3A 4-Lead High Torque Speed Reduction Motor with Gear Box Motor for CNC Milling Lathe Router Engraving Machine
Ratio 1:5 Gearbox Nema23 Geared Stepper Motor 76mm 850oz-in 3A 4-Lead High Torque Speed Reduction Motor with Gear Box Motor for CNC Milling Lathe Router Engraving Machine
By RATTMMOTOR
In Stock
$59.00

mpn: S23, ean: 0785004502537,

4.2 out of 5 stars with 40 reviews
Package include:1 x 57HSG76 Nema23 geared stepper motor 1:5 High quality NEMA23 Gearbox stepper motor:General Specification:  Step Angle: 1.8degreeCurrent : 3AHolding Torque :850oz.inMotor Length : L76mmPhase:2Type:HybridSize:57x57x76mmLead : 4 Lead Reduction ratio:1:5Step angle accuracy: ±5%(full step,not load)Resistance accuracy: ±10% Inductance accuracy: ±20%  Temperature rise: 80deg Max(rated current,2 phase on)Ambient temperature -----------20deg~+50degInsulation resistance:100M


LM YN THB6128 Stepper Motor Drive Control Module Two-phase Four-wire 30V 2A Drive Board 1,2,4,8,16,32,64,128 Subdivision Optional
LM YN THB6128 Stepper Motor Drive Control Module Two-phase Four-wire 30V 2A Drive Board 1,2,4,8,16,32,64,128 Subdivision Optional
By LM YN
In Stock
$14.99

ean: 0612957707576,

4.7 out of 5 stars with 51 reviews
Pin Description: CP +: Pulse positive input CP-: Pulse negativeinput DIR +: Direction positive input DIR-: Direction negative input EN +: Enable positive input EN-: Enable negative input B-: Motor B-phase negative output B +: Motor B-phase positive output A-: Motor A-phase negative output A +: Motor A-phase positive output VG: power supply negative VM: power supply positive 1*THB6128 Stepper Motor Drive Control ModuleUsing THB6128 double full-bridge MOSFET driver, low on-resistance. Chip with


4V-6V DC 2 phase 4 wire Micro stepper motor with slider dia15MM Rod 50MM Step angle 18 degrees
4V-6V DC 2 phase 4 wire Micro stepper motor with slider dia15MM Rod 50MM Step angle 18 degrees
By Dowonsol
In Stock
$11.99

mpn: 9068A, ean: 0711420072897,

4.4 out of 5 stars with 13 reviews
Specifications: Motor type: 2 phase 4 wire system Drive voltage: 4-6V / 500mA Screw length: 50mm Slider stroke: 38mm Motor diameter: 15mm Screw diameter: 3mm Screw pitch: 3mm Step angle: 18 degreesWorking Voltage DC4-6V. Screw size: length 50MM diameter 3MM pitch 3MM. Motor diameter: 15mm. Net weight: about 80g. Step angle: 18 degrees.


B Blesiya DIY IBT-4 50A Motor Driver High-Power Module Smart Car Driver for Arduino
B Blesiya DIY IBT-4 50A Motor Driver High-Power Module Smart Car Driver for Arduino
By B Blesiya
In Stock
$14.99

mpn: 870b8ca02e2220af623b68721803a683, ean: 0721093642778,

4.1 out of 5 stars with 55 reviews
Description: - MOSFET high current (50A) H bridge driver - Single chip PWM signal isolation, effective protection of SCM - Can achieve positive inversion of your motor; two PWM input with frequency up to 200KHz - Fully compatible with the voltage range from 3.3V to 12V - Power supply 5V to 15V - Clear power indicatorSpecification: - Size: 80x50x8mmPackage Includes:1 x Motor Driver Module (5-15V/50A)We strive to offer 5 Star Service in delivery, shipping and after-sales service. If you have any


DM556 2-Phase Stepper Motor Driver 42/57 Stepping Motor Controller
DM556 2-Phase Stepper Motor Driver 42/57 Stepping Motor Controller
By Hilitand
In Stock
$23.99

mpn: Hilitandz07rpu4miq, ean: 0736077241045,

4.2 out of 5 stars with 34 reviews
Specification: Model: DM556 Application: 42/57 stepper motor Input voltage: DC 20-50V Output current: 1.0-5.6A, 8 level adjustable, 0.5A resolution Drive method: Bipolar constant current PWM drive Pulse response frequency: 200kHz(Max) Insulation resistance: >500MΩ Insulation strength: 500V/min Dimensions: 118*75.5*34mm / 4.6*3.0*1.3in Weight: Approx. 270g / 9.5oz   Package list: 1 * Steeper Motor Driver★USAGE: Fit for 42/57 stepper motor and widely used in automatic packaging machine, engra


Leeson 102015.00 General Purpose TEFC Motor, 1 Phase, 48 Frame, Rigid Mounting, 1/4HP, 1200 RPM, 115/208-230V Voltage, 60Hz Fequency
Leeson 102015.00 General Purpose TEFC Motor, 1 Phase, 48 Frame, Rigid Mounting, 1/4HP, 1200 RPM, 115/208-230V Voltage, 60Hz Fequency
By Leeson
In Stock
$285.29

mpn: 102015.00, ean: 0691720006139,

4.8 out of 5 stars with 46 reviews
Leeson manufactures electric motors, gear reducers, and electronic controls for commercial and industrial applications. The company, founded in 1972, is headquartered in Grafton, WI.(TEFC) Totally enclosed, external fan-cooled motor for use in dusty or damp environments. Rated at 1,200 rpm. 115/208-230V input voltage, single phase, 1/4hp. UL Listed and CSA certified for quality assurance.


Leeson 108092.00 SCR Rated DC Motor, 56C Frame, C-Face Rigid Mounting, 1 1/2HP, 1750 RPM,  180V Voltage
Leeson 108092.00 SCR Rated DC Motor, 56C Frame, C-Face Rigid Mounting, 1 1/2HP, 1750 RPM, 180V Voltage
By Leeson
In Stock
$459.99

mpn: 108092.00, ean: 0691720006771,

4.2 out of 5 stars with 50 reviews
Leeson manufactures electric motors, gear reducers, and electronic controls for commercial and industrial applications. The company, founded in 1972, is headquartered in Grafton, WI.(TEFC) Totally enclosed, external fan-cooled motor for use in dusty or damp environments. Rated at 1,750 rpm. 90VDC and 180VDC input voltage, 1-1/2hp. UL Listed and CSA certified for quality assurance.


Leeson 110047.00 General Purpose C Face Motor, 3 Phase, 56 C Frame, Round Mounting, 3/4HP, 1800 RPM, 208-230/460V Voltage, 60Hz Fequency
Leeson 110047.00 General Purpose C Face Motor, 3 Phase, 56 C Frame, Round Mounting, 3/4HP, 1800 RPM, 208-230/460V Voltage, 60Hz Fequency
By Leeson
In Stock
$236.00

mpn: 110047.00, ean: 0691720007662,

4.3 out of 5 stars with 43 reviews
Leeson manufactures electric motors, gear reducers, and electronic controls for commercial and industrial applications. The company, founded in 1972, is headquartered in Grafton, WI.(TEFC) Totally enclosed, external fan-cooled motor for use in dusty or damp environments. Rated at 1,800 rpm. 208-230/460V input voltage, three phase, 3/4hp. UL Listed and CSA certified for quality assurance.


Leeson 102907.00 General Purpose C Face Motor, 1 Phase, S56C Frame, Rigid Mounting, 1/2HP, 1800 RPM, 115/208-230V Voltage, 60Hz Fequency
Leeson 102907.00 General Purpose C Face Motor, 1 Phase, S56C Frame, Rigid Mounting, 1/2HP, 1800 RPM, 115/208-230V Voltage, 60Hz Fequency
By Leeson
In Stock
$286.56

mpn: 102907.00, ean: 0691720248003,

4.6 out of 5 stars with 17 reviews
Leeson manufactures electric motors, gear reducers, and electronic controls for commercial and industrial applications. The company, founded in 1972, is headquartered in Grafton, WI.(TEFC) Totally enclosed, external fan-cooled motor for use in dusty or damp environments. Rated at 1,800 rpm. 115/208-230V input voltage, single phase, 1/2hp. UL Listed and CSA certified for quality assurance.


KBRC-240D (8840Q) with QIE Exclusive 3 YEAR Warranty, DC Drive
KBRC-240D (8840Q) with QIE Exclusive 3 YEAR Warranty, DC Drive
By KB Electronics
In Stock
$314.00

mpn: KBRC-240D (8840Q),

4.5 out of 5 stars with 46 reviews
The KBRC-240D is a Full-Wave Regenerative Drive in a NEMA-4X enclosure. It is designed to operate 90 and 180 Volt Permanent Magnet and Shunt Wound DC motors in a bidirectional mode. It provides 4-quadrant operation, which allows forward and reverse torque in both speed directions. This allows the control to maintain constant speed with overhauling loads and provides rapid instant reversing and controlled braking. Because of its excellent performance, the control can replace servo drives in many


Leeson 100207.00 Jet Pump Motor, 1 Phase, S56J Frame, Round Mounting, 1/2HP, 3600 RPM, 115/208-230V Voltage, 60Hz Fequency
Leeson 100207.00 Jet Pump Motor, 1 Phase, S56J Frame, Round Mounting, 1/2HP, 3600 RPM, 115/208-230V Voltage, 60Hz Fequency
By Leeson
In Stock
$158.04

mpn: 100207.00, ean: 0691720004692,

4.0 out of 5 stars with 50 reviews
Leeson manufactures electric motors, gear reducers, and electronic controls for commercial and industrial applications. The company, founded in 1972, is headquartered in Grafton, WI.Open, drip-proof (ODP) for protection from dripping water. Rated at 3,600 rpm. 115/208-230V input voltage, single phase, 1/2hp. UL Listed and CSA certified for quality assurance.


SAVORY DRIVE MOTOR (208/240V,SAVORY) 22743
SAVORY DRIVE MOTOR (208/240V,SAVORY) 22743
By SAVORY
In Stock
$143.10

mpn: 22743, ean: 0221891036378,

4.7 out of 5 stars with 32 reviews
SPECIFICATIONS LENGTH: 5 1/2'', 140 mm WEIGHT: 2.703 lb VOLTAGE: 208/240 V AC AMP: .28/.21 INCLUDES: FAN TYPE: 22'' WIRE LEADS PART REFERENCE INFO SAVORY: 21212, 21239, 22743, 22743SP MODEL REFERENCE INFO SAVORY TOASTER, CONVEYOR MODELS: C20, C20D, C20VS, C40, C40D, C40VS, RB33, RB33VS, RT2T, RT3PZ SAVORY TOASTER, CONVEYOR BUN MODELS: RT2AR, RT2VS, RT2VSHOSAVORY. Drive Motor. 22743. High Quality. 22'' Wire Leads.



Viewing Page 2 of 7

View more products in Controls & Indicators.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - daysofrevelation.com. All Rights Reserved.