Browse Our Catalog

IO Modules - Page 2 - Extreame Savings! Save up to 44%


Extreame Savings! Up to 44% off on IO Modules at Days of Revelation, Page 2. Top brands include Electronics-Salon, Brentek, Allen-Bradley, Siemens, Homyl, ICP DAS, Opto 22, Crouzet Automation, & CZH-LABS. Hurry! Limited time offers. Offers valid only while supplies last.



Electronics-Salon IDC64 2x32 Pins 0.1" Male Header Breakout Board, Terminal Block, Connector.
By Electronics-Salon
In Stock
$25.00

mpn: MD-D227-1, ean: 6921407349032,

4.6 out of 5 stars with 57 reviews
IDC64 2x32 Pins 0.1'' Male Header Breakout Board. IDC pin pitch 2.54mm/0.1'' male header connector. Pitch 3.81mm/0.15'' screw terminal block. FR-4 fiber glass PCB, dual copper layers. Dimensions: 72 x 137.35 x 31mm(W x L x H). 100% new, never used. Rated voltage: 60V. Rated current: 1A / per pin. Operating Temperature: -20ºC to 50ºC Terminal block specifications: Wire range - 26-16AWG. Strip length - 5mm. Screws - M2,steel,Cr3+ Zn plated. Torque - 0.2Nm (1.7Lb-In.). Pin header and Cage -


Brentek G-8AMP5 Dry Contact Output Module (1-Pack)
By Brentek
In Stock
$32.50

mpn: G-8AMP5,

4.9 out of 5 stars with 41 reviews
Brentek's G-Series G-8AMP5 high current Dry Output Modules provide direct control of power loads, such as motors, contactors, solenoids and lights. They are directly compatible with industry standard I/O mounting racks from OPTO 22, Grayhill, Gordos, and Crouzet. High reliability and Industrial Temperature rating (-40 to +70 deg. C) makes this series ideal for robust industrial control applications. The input is active-low. TTL and CMOS outputs can control this module directly. The versatile


1769-IF4 CompactLogix New
By Allen-Bradley
In Stock
$275.00
$274.48

mpn: 1769-IF4 New,

4.4 out of 5 stars with 44 reviews
New-4 PT A/I C AND V MODULE CompactLogix1769-IF4. 1769-IF4 SER B. ALLEN BRADLEY 1769-IF4.


SIEMENS 6ES7 134-4GD00-0AB0, ANALOG INPUT MODULE 6ES7 134-4GD00-0AB0
By Siemens
In Stock
$275.00

mpn: 6ES7134-4GD00-0AB0, ean: 4025515071969,

4.3 out of 5 stars with 29 reviews
Siemens 6Es7 134-4Gd00-0Ab0,Simatic Dp, Electronic Module Et200s,4Ai Standard I-2-Wire, 4 - 20Ma; 13Bit,15Mm Width, For 2-Wire Transducer Cycle Time 40 Ms/Module With Led SfWeight: 0.83lb. Product Dimensions: 7.00 x 7.00 x 6.00 inches. Condition: New.


Homyl 8-Channel DAQ IO Module Board for Remote Control - LAN, Ethernet, PLC M320T
By Homyl
In Stock
$158.38
$87.99
You Save: 44%

mpn: e22c6faa0c188782748933fd028c75ce, ean: 0746210332882,

4.8 out of 5 stars with 7 reviews
Description: - The M320T is for measuring 8 channel analog - input(0~5V,0~10V,4~20mA,0~20mA ) and provides a RS485 interface, through the RS485 bus, it can cascade Modbus RTU I/O devices or Modbus RTU meters, e.g.: a variety of digital input or digital outputs, analog inputs or outputs, thermal resistance IO module combination, save costs. At the same time, the Ethernet Remote I/O module has register mapping function, the cascade Modbus RTU I/O data are automatically collected to the mapping mem


ICP DAS IR-712A Universal IR Infrared Learning Remote Module with 2 IR outputs, 224 IR Command Storage, supports Modbus RTU protocol and RS-232 and RS-485 serial interface
By ICP DAS
In Stock
$159.00

mpn: IR-712A,

4.1 out of 5 stars with 54 reviews
Universal IR Infrared Learning Remote Module to Modbus RTU converter (2 IR outputs, 224 IR Cmds), with 2 CA-IR-SH2251 & 1 CA-0910, communicable over RS-485 and RS-232, supports operating temperature from -25C ~ +75C (-13F ~ 167F). IR-712A is a universal IR learning remote module which can learn IR remote commands of diverse electronic devices. The learning commands can be stored in the module or saved to a file. IR-712A supplies 2 IR output channels for individual or simultaneous control on


tM-P3R3
By ICP DAS
In Stock
$99.00

mpn: tM-P3R3,

4.8 out of 5 stars with 32 reviews
3-channel Isolated Digital Input and 3-channel Relay Output Module, communicable over Modbus RTU protocol.


Opto 22 SNAP-ODC5-I - SNAP Digital (Discrete) Output Module, 4 Isolated Channels, 5-60 VDC
By Opto 22
In Stock
$55.00

mpn: SNAP-ODC5-I,

4.9 out of 5 stars with 41 reviews
The SNAP-ODC5-i provides four isolated channels of 5-60 VDC digital (discrete) output, each switching a separate DC load. The module features channel-specific LEDs for troubleshooting and includes a connector clamp to prevent sparks. Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for PC-based control or for use as


Opto 22 SNAP-AITM - SNAP Analog Input Module, 2-Channel Thermocouple or mV Input
By Opto 22
In Stock
$195.00

mpn: SNAP-AITM, ean: 0013227041282,

4.3 out of 5 stars with 25 reviews
The SNAP-AITM module provides two channels of analog to digital conversion. Each channel on the module can be configured for -150 mV DC to +150 mV DC or -75 mV DC to +75 mV DC, or for type E, J, or K thermocouple operation. Since both inputs share the same reference terminal, use isolated probes for thermocouple inputs. SNAP analog input modules are part of Opto 22’s SNAP PAC System. These modules mount on a SNAP PAC rack with a SNAP PAC brain or R-series controller, either a standard wired


Opto 22 G4PB16I G4 16 Channel I/O Module Rack Isolated Control
By Opto 22
In Stock
$157.00

mpn: G4PB16I, ean: 0013227106875,

4.6 out of 5 stars with 45 reviews
The G4PB16I I/O mounting rack accommodates up to 16 G4 I/O modules and features channel-to-channel isolation between all field and control circuits. Output modules may have their control side wired for either positive-true or standard negative-true control signals from computer I/O ports. Input modules operate only with negative true logic. Insert and remove modules easily and quickly without disturbing field wiring. Modules are secured to the mounting rack with a captive hold-down screw. Barrie


Opto 22 SNAP-AOA-23 - SNAP Current Loop Analog Output Module, 2-Channel, 4-20 mA Input 5 Volts DC (+/-0.15) at 150 mA, Output Range , 16 mA Span
By Opto 22
In Stock
$195.00

mpn: SNAP-AOA-23, ean: 0013227067749,

4.1 out of 5 stars with 46 reviews
The SNAP-AOA-23 provides two channels of analog current output at a nominal range of 4-20 mA. An external loop power source is required for the current loops. Although the two channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and devices. The module is factory calibrated. Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted controller. Analog, digital, and serial I/O modules


Crouzet Automation 88974042 Controller Logic M3 Custom 8 DigitalIn/4 Relay Out 24 VDC PNP CD12ST
By Crouzet Automation
In Stock
$206.19

mpn: 88974042, ean: 0645220175598,

4.1 out of 5 stars with 37 reviews
CONTROLLER, PLC, 8 I/P, 4 O/P, 24VDC; No. of Digital Inputs:4; Supply Voltage:24VDC; IP / NEMA Rating:IP20, IP40; Product Range:- ;RoHS Compliant: Yes.


CZH-LABS IDC-26 Male Header Connector Breakout Board Module, IDC Pitch 0.1", Terminal Block Pitch 0.2"
By CZH-LABS
In Stock
$24.00
$21.00
You Save: 13%

mpn: MD-D1173-1, ean: 6954525580438,

4.7 out of 5 stars with 34 reviews
Standard high quality IDC/FRC connector, pin pitch 2.54mm / 0.1'' Standard high quality terminal block, position pitch 5.08mm / 0.2'' Solder connection holes 7 per line, supports addition of 2.54mm / 0.1'' pin headers. Clear terminal block position marking label, match the position corresponding to the IDC connector. FR-4 fiber glass PCB, dual copper layers. Terminal Block: Pitch 5.08mm/0.2'' screw terminal block. Wire range 26 to 12AWG / 2.5mm square. Strip length 7mm / 0.28'' Screws - M2.5,


Electronics-Salon RJ45 8P8C 9-Way Buss Board DIN Rail Mount Interface Module.
By Electronics-Salon
In Stock
$20.99

mpn: MD-D238T-1, ean: 6921407349391,

4.6 out of 5 stars with 42 reviews
RJ45 9-Way Buss Board DIN Rail Mount Interface Module. Part number: MD-D238T. RJ45 vertical shielded 8P8C jacks. DIN rail mountable - for width 35 / 32 / 15mm rails. DIN mount case can be taken apart for panel mount use. High quality PCB housing/carrier. FR-4 fiber glass PCB, dual copper layers. External dimensions: 72.5 x 83 x 42mm(W x L x H). PCB dimensions: 72.5 x 80(W x L). 100% new, never used. Rated voltage: 100V. Rated current: 500mA / per pin. Operating Temperature: -20ºC to 50ºC


Allen Bradley 1746-Obp16 1746-0Bp16 1746Obp16 I/O Board
By Allen-Bradley
In Stock
$480.00

mpn: 1746-OBP16,

4.9 out of 5 stars with 48 reviews
I/O BOARD I-O Digital: Type - PLC Digital DC Output Module; Voltage Category - 24 Vdc; Operating Voltage - 20.4-26.4 Vdc Source; Number of Outputs - 16 outputs; Current Rating Per Output - 1.5A @ 30-deg C, 1A @ 60-deg C; I/O Application - Protected Outputs; Signal Delay - ON=0.1 ms OFF=1 ms; Backplane Current - 250 mA @ 5V; Additional Information - Features a Fused Common and Blown Fuse LED; PLC SystemSeries: SERIES C. Output Voltage: 20.4-26.4 V-DC. Output Current Rating: 6.4 A. Type: Output


Allen-Bradley 1746-NIO4V Analog Combination I/O Module
By Allen-Bradley
In Stock
$995.00

mpn: 1746-NIO4V,

4.2 out of 5 stars with 51 reviews
Allen-Bradley 1746-NIO4V Analog Combination I/O Module, 10VDC SLC 500 High Resolution Combination Module, 2 Analog Inputs, 2 Analog Voltage OutputsSeries: SER A. Output Voltage: 24 V-DC. Output Current Rating: 145 MA. Type: Output Module. SKU: D271019 (KFP).


Allen Bradley 1769-OW16 Compact I/O Digital Output Module, 16-Point, 5 - 265 VAC / 5-125 VDC, Relay
By Allen-Bradley
In Stock
$299.00

mpn: 1769-OW16,

4.7 out of 5 stars with 32 reviews
Allen-Bradley 1769-OW16 CompactLogix Digital Output Module, (16) Digital Relay Outputs, 5 - 265 VAC / 5-125 VDCNew Factory Sealed. Series A. F/W 3.1 or later.


22A-V4P5N104 PowerFlex 4 New
By Allen-Bradley
In Stock
$550.00

mpn: 22A-V4P5N104 New,

4.0 out of 5 stars with 7 reviews
New-0.75 KW (1 HP) PowerFlex 4 AC Drive.


Opto 22 SNAP-PAC-RCK16 - SNAP PAC 16-Module Mounting Rack
By Opto 22
In Stock
$161.00

mpn: SNAP-PAC-RCK16, ean: 0013227106929,

4.3 out of 5 stars with 40 reviews
The SNAP-PAC-RCK16 mounts one SNAP PAC brain or on-the-rack controller and up to 16 analog, digital, and serial SNAP I/O modules. Together, the rack, I/O, and processor form an I/O unit that provides distributed control in a SNAP PAC System. This I/O unit can also be used for PC-based control or as intelligent remote I/O for an Allen-Bradley MicroLogix, ControlLogix, or CompactLogix PLC system. This rack works with all SNAP I/O modules on the Opto 22 website. Modules can be mixed on the rack and


Siemens 6ED1052-1MD08-0BA0 LOGO! 12/24RCE, logic module, disp PS/I/O: 12/24VDC/relay, 8 DI (4AI)/4DO, memory 400 blocks, modular expandable, Ethernet
By Siemens
In Stock
$145.00

mpn: 6ED1052-1MD08-0BA0, ean: 4034106031046,

4.6 out of 5 stars with 19 reviews
LOGO! 12/24RCE, logic module, disp PS/I/O: 12/24VDC/relay, 8 DI (4AI)/4DO, memory 400 blocks, modular expandable, Ethernet, integr. web server, data log, user-defined Web pages, standard microSD card for LOGO! Soft Comfort V8 or higher, older projects executableSiemens 6ED1052-1MD08-0BA0 (new model replace for previous model 6ED1052-1MD00-0BA8).



Viewing Page 2 of 7

View more products in Controls & Indicators.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - daysofrevelation.com. All Rights Reserved.